As a structure

Have you encountered it in the review review

Does the 01 door rigid wind load need to perform the “General Specification of Engineering Structure”?

02 How to adjust the over limit of concrete beam cuts? Why increase the beam height and the cuttings of cutting are more serious?

03 What are the requirements for determining the bearing capacity in the “General Specification of the Foundation of the Architecture and Municipal Engineering Foundation”?

China Institute of Architecture Sciences Co., Ltd.

Education Innovation Center, a subordinate Jianyan Technology Co., Ltd., after 10 months of professional teaching and research, together with the 10+ bit structure design (picture review) experts, together

Collect and organize complex and difficult problems in the recent structural diagram review

, Set the Structural Construction Drawing Explanation Foreign Examination, 2022 New Pass Concrete Structure External Examples, 2022 New Public Regulation Reinforcement Reconstruction Engineering External Review, Civil Defense Engineering External Review, Structural Construction Examination Design and Disposal Disputes, Structure Calculation Results Reasonable results Sexual analysis and judgment, interpretation of the “General Specifications for the Foundation of Architectural and Municipal Engineering Foundation” and the foundation of foundation foundation, the internal review of civil concrete structures, the internal review of civilian steel structure design, the internal review of the door -style rigidity Large cross -steel structure design internal review, prefabricated structure design internal review, reinforcement renovation design internal review, etc.

14 major topics, in 2 months, 17 on -site live broadcasts answers question interaction

From the in -depth analysis of the principle, tell you the correct solution and ideas, and solve the problems of various maps you encountered at the same time.

Subordinates Jianyan Technology Co., Ltd. Building Cloud Alliance

“Structural Construction Figure Review of High -end Training Course” 2022 New Tongpan

Everyone wants to learn

0 distance from full live broadcast high -end training classes

Class 22-05, scheduled to open on May 18

Small class teaching, limited quota

Long press the QR code, overtime teacher WeChat

Learn the course details and seize the final quota!

↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑

Take your problem and solve it here!

01 Learning arrangement

Special one

Structural construction drawings explanation from common problems

01 training purpose

Grasp the external review countermeasures of the construction drawing design

02 Subjective content

1. The main content and main points in the general description of structural design;

2. The understanding and application of the new version of “General Specifications”;

1. “General Specification of Engineering Structure” GB55001-2021

2. “General Specifications for Earthquake Resistance of Construction and Municipal Engineering” GB55002-2021

3. “General Specification of Building and Municipal Foundation Foundation” GB55003-2021

4. “General Specification of Concrete Structure” GB55008-2021

5. “Specification of Steel Structure” GB55006-2021

自从搞懂了这100+问题,我再也不怕图审专家了

6. “General Specifications for Masonry Structure” GB55007-2021.

Third, the design standards in the structure must be clearly determined and reasonably determined;

Fourth, the key content of structural majors in fire design;

5. Seismic settlement category, seismic level, structural safety level and correlation;

6. The main content of structural majors in municipal engineering (pipe network);

7. Analysis of special engineering cases (located in a medical building in a height zone, with both high -level units and multiple units, high -rise over -limit, in addition to earthquake resistance design, also adopted basic seismic design and energy -elimating shock absorption design and over -limit analysis. , Earthquake analysis, shock absorption analysis.)

03 Answer direction

Complex and difficult problems in the construction diagram censorship

自从搞懂了这100+问题,我再也不怕图审专家了

04 live broadcast time

19:30 on May 20, 2022

Feng Liping

Professor -level senior engineer

National -level registered structural engineer, national registration consulting engineer. He has served as deputy chief engineer of the Gansu Provincial Institute of Architecture and Research. The chief workers, general manager, chairman, and party secretary of the Gansu Provincial Institute of Engineering Design. Enjoy special allowances of the State Council and high -level professional and technical talent allowances in Gansu Province.

Topic Two

In 2022, the external review of the newly -organized concrete structure

Grasp the external review of concrete design and construction drawings

1. What problems need to pay attention to when determining the upper structure embedded site?

2. How to correctly determine the high -span framework resistance?

3. Framework-The design of the shear wall structure needs to be paid attention to?

Fourth, what are the issues of prefabricated prefabricated concrete structure design?

Fifth, what are the problems of the steel frame structure pillar with the basement?

6. What are the problems of the edge component of the shear wall?

7. When there is an oblique anti -side force component, what problems need to be paid attention to when calculating the calculation of the additional angle?

8. What are the issues that need to be paid attention to when adopting the design of anti -energy reduction design?

Nine, the problem of vulnerability encountered in the review and the problem of violating compulsory provisions after performing universal norms.

The general regulations involved:

1. “General Specifications for Earthquake Resistance of Construction and Municipal Engineering” GB55002-2021

2. “General Specification of Concrete Structure” GB55008-2021

3. “General Specification of Engineering Structure”

Examination center key review issues

June 2, 2022 19:30

Specialty

In 2022, the external review of the reinforcement project

Grasp the external review of the reinforcement and reinforcement design construction drawing

First, what are the existing construction reinforcement projects needed?

2. What are the problems of structural design?

3. What are the problems needing to be paid to the selection of structural reinforcement schemes?

4. What problems need to pay attention to in the reinforcement of structural components?

Fifth, what are the problems with existing buildings to install elevators?

“Against Code for Architectural Appraisal and Reinforcement”

“General Specifications for Architectural Maintenance and Transformation”

“General Specifications for Concrete Structures”

“General Specification of Engineering Structure”

June 7, 2022 19:30

Special Titles

Civil defense engineering external review issues

Grasp the external review of civil defense design and construction drawings

1. What are the issues need to pay attention to the values ​​of the carrier load of civil defense?

2. What are the problems of human anti -topboard design?

3. What are the issues need to pay attention to the design of private defense?

4. What are the issues need to pay attention to the basic design of private defense?

Fifth, what are the problems of human defense wall design?

6. What are the problems of the design of the people’s defense port?

7. What are the problems need to pay attention to when the construction of the pouring band and the construction seam after construction?

8. What are the issues need to pay attention to the design of private walls?

19:30 on June 21, 2022

Zhang Yonggang

Professor

Senior engineer

Beijing Jianyuan Jingcheng Standard Engineering Consulting Co., Ltd., a first -level registered structural engineer in the professional chief worker (structure), and a member of the Beijing Municipal Review Association Housing Architecture and Technical Committee.

Topic Five

Structural construction map review design and disputes of map review

Master the solution of the new general regulations and the hot disputes of the map review

1. “General Specification of Engineering Structure” About Calculation of Flexible Wall Loading Calculation

2. “General Specifications for Engineering Structures” About the problem of loading of kitchen and dining room

3. Whether the door -type rigid wind load must implement the “General Specification of Engineering Structure”

4. About when you need to consider the problem of calculation of the two -way earthquake effect

5. Related issues related to the characteristic cycle

6. Is the cycle discounting no longer as a strong bar, how to control it reasonably?

7. Framework with a height of not more than 60m-core cylinder structure seismic level?

8. Framework-The core cylinder system is not required to be closed?

Nine, can the cushion or backfill be used to use the C15 concrete?

10. Is there any relevant strong bar requirements for the strength level of the filling wall?

The specifications involved:

Countermeasures

19:30 on May 24, 2022

Special Six

Analysis and judgment of the rationality of structural calculation results

Software ratio selection, judge the reasonable of calculation results

1. Overview of the preface

2. Reasonable selection of structural design calculation procedures

3. How should structural engineers choose many computing software?

4. What are the specific requirements of the “Specifications” for the correct application of structural design calculations?

Fifth, typical engineering cases

Case cover: Due to the missed design, the selection of design parameters is not reasonable, the calculation results caused by model simplification problems, conceptual problems, etc.

The specifications involved:

Structural design optimization

19:30 on May 26, 2022

19:30 on May 31, 2022

Well -known engineering experts and scholars in Weilin

Senior professor -level senior engineer (2001 promotion), the first national first -level registered structural engineer, served as director, chief engineer, chief engineer, director, and director.

Social part -time job: The Ministry of Housing and Urban -Rural Research (Scientific Research) Series is the seventh judge of the seventh qualification review review of the title of the title of the job title; professor of Harbin Institute of Technology, a training professor of the Beijing Survey and Design Association special registered structural engineer, the Chinese Rock and Lower and Engineering Institute Vice Chairman of the Foundation Branch, specially invited review experts of “Architectural Structure” magazine; “Foundation Basic Technology Innovation Alliance” consulting expert; experts of the home of the National Real Estate Commander (CTO Think Tank), experts from the China Construction Enterprise Management Association Green Construction Review Experts Wait; since 2009, have been invited to conduct nearly 110 lectures in more than 50 large and medium -sized cities across the country;

As a specially invited reviewer, he has participated in the evaluation of many specifications, regulations, standards, and doubtful projects.

Weilijin

Special Topic Seven

Interpretation of “General Specifications for the Foundation of Construction and Municipal Engineering Foundation” and the problem of foundation foundation

Master the difficulty of basic selection, raft foundation, and foundation processing

1. Interpretation of “General Specifications for Foundation of Architecture and Municipal Engineering”

2. How to write a geological survey task book, how to read the geological survey report, how to find the problems in the geographical survey report and how to communicate with the geographical survey unit.

3. How to choose a reasonable basic form correctly?

Fourth: How to consider the common role of the upper structure, foundation, and foundation for the basic design of the raft board?

Five: foundation processing and composite foundation

The above problems are combined with the following cases explanation

Case 1: Geological Survey task for a complex project of a mountain.

Case 2: From different structural forms; high -level, multi -layer, and bottom layer of different layers; from raft to independent (pile ports) plus waterproof board; selection and basic design from composite ground -based to pile foundations Essence

Case 3: The foundation of the foundation of the foundation foundation of a box, the preliminary design calculation method, and the application of the foundation basic design software application of the three simultaneous design of the foundation.

Case 4: Specific cases of different ages (scattered piles in the early 1990s, flexible piles in the middle and late 1990s, composite CFG piles in 2000, and rigid soft composite piles from 2010 to the present), analyze the nature and application of different composite foundations Scope and advantages and disadvantages, determine the corresponding compound base selection type.

“General Specification of Foundation of Architectural and Municipal Engineering Foundation”

Foundation basic design related issues

19:30 on June 14, 2022

19:30 on June 16, 2022

Wang Suo

Special experts, first -level registered structural engineers, senior engineers, Beijing Blueprint Engineering Design Co., Ltd. Structure Professional Engineer.

Speaker of the Senior Training Course “Foundation and Basic Design Thinking and Practice Slotting Class” of the Word of Word of the Architecture Cloud League.

Eight

Civil concrete structure design internal review common problems

Clarify the details of the design of concrete structure

1. Dimin design of the component

1. How to adjust the over limit of concrete beam cuts? Why increase the beam height and the cuttings of cutting are more serious?

2. How to set up with twisted storkers and longitudinal tendons?

3. What is the difference between the balance and coordination of reinforced concrete structures?

4. Is there a beam of the floor, is the torque reduction coefficient of 0.4?

5. Can the beams be reduced to the torque of the beam?

6. How to design a steel concrete beam?

Second, retaining wall

1. Can the foundation under the retaining wall be simulated with a base beam?

2. Can the retaining wall be calculated with active soil pressure?

3. The difference between water and soil and soil and soil and soil?

4. The horizontal distributed tendon is in the inside of the vertical reinforcement or outside?

5. How to determine the thickness of the retaining wall of the reinforcement layer? (Affecting crack calculation)

6. The GB/T 50476-2019 of the “Concrete Structure Duration Design Standard” stipulates that “the thickness of the protective layer is greater than 30mm, is it reasonable to calculate the cracks according to 30mm”?

Third, no basement, one layer of beams to build a model

1. What is the difference between the first layer of tensoring beams and the internal force in the basic module and the internal force of the concrete column?

2. What is the difference between yjk and the foundation beam?

3. What is the difference between JL and JLL?

China Institute of Architecture Sciences Co., Ltd.

“Structural Construction Figure Review of High -end Training Course” 2022 New Tongpan

“Structural Construction Figure Review of High -end Training Course” 2022 New Tongpan

Class 22-05, scheduled to open on May 18

Class 22-05, scheduled to open on May 18

Small class teaching, limited quota

Small class teaching, limited quota

Long press the QR code, overtime teacher WeChat

Long press the QR code, overtime teacher WeChat

Learn the course details and seize the final quota!

Learn the course details and seize the final quota!

↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑

↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑

Take your problem and solve it here!

Take your problem and solve it here!

01 training purpose

01 training purpose

01 training purpose

01 training purpose

01 training purpose

01 training purpose

01 training purpose

02 Subjective content

02 Subjective content

02 Subjective content

02 Subjective content

02 Subjective content

02 Subjective content

02 Subjective content

1. “General Specification of Engineering Structure” GB55001-2021

1. “General Specification of Engineering Structure” GB55001-2021

2. “General Specifications for Earthquake Resistance of Construction and Municipal Engineering” GB55002-2021

2. “General Specifications for Earthquake Resistance of Construction and Municipal Engineering” GB55002-2021

3. “General Specification of Building and Municipal Foundation Foundation” GB55003-2021

3. “General Specification of Building and Municipal Foundation Foundation” GB55003-2021

4. “General Specification of Concrete Structure” GB55008-2021

4. “General Specification of Concrete Structure” GB55008-2021

5. “Specification of Steel Structure” GB55006-2021

5. “Specification of Steel Structure” GB55006-2021

6. “General Specifications for Masonry Structure” GB55007-2021.

03 Answer direction

03 Answer direction

03 Answer direction

03 Answer direction

03 Answer direction

03 Answer direction

04 live broadcast time

自从搞懂了这100+问题,我再也不怕图审专家了

04 live broadcast time

04 live broadcast time

04 live broadcast time

04 live broadcast time

04 live broadcast time

Feng Liping

自从搞懂了这100+问题,我再也不怕图审专家了

The general regulations involved:

Examination center key review issues

Examination center key review issues

Zhang Yonggang

Senior engineer

The specifications involved:

Wang Suo

4. When calculating the foundation, when should you check the “Specifications for Earthquakes” 6.2.3 Pillar bottom bending momentum coefficient?

Fourth, anti -pile design

1. What is the difference between anti -pile and pressure -resistant piles, the resistance of motor resistance and axis?

2. Should be equipped with long reinforced bars with anti -pull piles. Is all steel bars long?

3. Anti -pile cracks 0.2mm, 0.3mm?

自从搞懂了这100+问题,我再也不怕图审专家了

General specifications involved:

“General Specifications for Building and Municipal Foundation Basics”

“General Specifications for Concrete Structures”

03 Answer direction

Civil concrete structure design

04 live broadcast time

19:00, June 28, 2022

Special Nine

Frequently issues in the design of civilian steel structure design

01 training purpose

Master the design of the concept of steel structure stability

02 Subjective content

1. Steel beam overall steady design

1. The steel frame beam without the floor on the top has a stable and calculation overrun. After adding the steel secondary beam, the overall stability of the steel frame beam is passed?

自从搞懂了这100+问题,我再也不怕图审专家了

2. What kind of steel secondary beam can be regarded as the side support of the steel frame beam?

3. Why can the horizontal horizontal support rod and the supporting rod set in the beam of the beam can the side bend and reverse?

4. Although the second beam added by the main beam, although it cannot be counted as the effective side of the main beam, does it have no effect on the stable and loading capacity of the main beam?

5. Can the steel beams of the upper -paving steel plate not calculate the overall stability?

2. Direct analysis and design method of steel structure

1. The “Standards for Steel Structure” GB 50017-2017 Article 5.5.1 stipulates that when direct analysis of the design method is adopted, there is no need to perform component stability and bearing capacity of the component method according to the calculation length method. However, Article 5.5.7 of the GB 50017-2017 of the “Steel Structure Design Standard” stipulates that when the component may cause side-to-stability, the section bearing capacity of the component is performed according to the formula. Why do you need to directly analyze the design method to consider the overall stability coefficient of the beam?

2. Use a direct analysis design method to design framework-when supporting the structure, why is there still bending moment in addition to the axis?

Third, the steel column length ratio ratio

1. Why do non -seismic steel columns restrict the length ratio?

2. Why are the seismic steel columns restricting the length ratio? Has the seismic specification long fine ratio limit bar canceled?

3. The wall thickness of the steel column is thicker, and the length ratio is over limit?

4. The axial pressure ratio of a steel column is 0.01, and the stress ratio is 0.20, but the length ratio is over limit. How to adjust?

5. Can I use a second -order analysis to calculate the length ratio?

6. Is the performance of the performance and the limited limit of a long and fine ratio?

Fourth, column axis pressure ratio

1. Why should reinforced concrete columns limit the axis pressure ratio?

2. Why does the rectangular steel pipe concrete column limit the axis pressure ratio?

3. Why does the round steel pipe concrete column not limit the axis pressure ratio? Can round steel pipe concrete column pressure ratio exceed 1.0?

4. What kind of steel column needs to limit the axis pressure ratio?

“Common Structure Common Specifications”

“Specification Specifications for Steel Structure”

Civil steel structure design

19:00, June 30, 2022

Golden wave

Professor -level senior engineer

CITIC Architectural Design and Research Institute of the Fifth Court of Design of the General Institute of Design. Member of the Youth Engineer Working Group of the China Survey and Design Association Structure Design Branch, an outstanding young man in the national construction structure industry. He has been engaged in structural engineering design for more than 20 years, and has been designing the front line of design, and is familiar with the analysis of structural computing.

“Structural Construction Figure Review of High -end Training Course” 2022 New Tongpan

Class 22-05, scheduled to open on May 18

Small class teaching, limited quota

Long press the QR code, overtime teacher WeChat

Learn the course details and seize the final quota!

↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑

Take your problem and solve it here!

Top Ten

Frequently Asked questions in the door of the door rigid & steel plant

Master the key points of the design of industrial steel structure factories

1. The impact of “General Specification of Engineering Structure” on the main structure of the main structure;

2. The impact of the “General Specification of Engineering Structure” on the load of the load of the enclosure structure;

Third, how to use software to consider the impact of the uneven layout of snow loads on the rigid frame and the bars.

自从搞懂了这100+问题,我再也不怕图审专家了

Fourth, how to get the value of the calculation length of the door -style rigid roof beam? How to consider the constraints of support?

Fifth, how should the door support of the door -type rigid frame be arranged? How to consider the restraint of the roof beam? Can you consider the supporting role of supporting the bar?

6. How to consider the role of roof panels and pull strips when designing the roof bars and walls?

7. When calculating the truss structure, the node is hinged or just connected? How to deal with support is reasonable?

8. How to deal with the high -thickness ratio of the beam and column of the factory structure? How to consider the “high latency, low bearing capacity” or “low latency, high bearing capacity” of the structure of the plant?

The specifications involved:

1. “Special Specifications for Steel Structure”

2. “General Specification of Engineering Structure”

Design of industrial steel structure plant

19:00, July 5, 2022

Luo Xiaolin

Senior engineer

Backeting of Shanghai Jiaotong University, master’s degree in Tongji University; first -level structural engineer, senior engineer; registered consulting engineer. He has been engaged in steel structure design, optimization and consultation for a long time. Xinye Steel steelmaking continuous casting project; climbing long steel forging heat treatment workshop; Fujian Fuxin special steel cold rolling workshop; Indonesian Kazakhstan steel water preparatory workshop renovation project; Guomen tennis hall; Mentougou Times Jinchuang R & D center.

Eleven

Difficulties in the depression design

Follow the core editorial board of the specifications and get the design of the shock reduction project.

The “Regulations on the Management of Construction Engineering” clearly requires that 8 types of buildings such as schools, hospitals, and kindergartens in high -intensity areas and earthquake -primary monitoring areas should be used normally when setting up defense intensity. Essence Earthquake seismic fully shows excellent seismic resistance in the earthquake. It has obtained a large number of applications in my country. With the promulgation of the Regulations, it will definitely develop greater development. The “General Specification of Earthquake Earthquakes in Architectural and Municipal Engineering” was officially promulgated in 2022.1.1. In the “General Regulations”, the design of shock absorption and seismic buildings made basic regulations. These regulations have technical regulations and cannot violate them. This report combines the “Regulations” and “Public Regulations” to interpret the relevant aspects of technical principles, earthquake performance, basic requirements, basic requirements, mining of earthquake product types and performance, calculation methods, seismic measures, and engineering application cases. The design requirements and provisions have a view to a deep understanding of these two technologies.

“Specification of Earthquake Earthquake Earthquake in Building and Municipal Engineering”

“Regulations on Earthquake Management of Construction Engineering”

Relaxation of seismic design related issues

19:30 on June 23, 2022

Researcher Xue Yantao

The Deputy Dean of the Engineering Consultation and Design Institute of Jianyan Technology Co., Ltd. of China Institute of Architecture Sciences, editor -in -chief of the “Energy Energy Energy Shock Reinforcement and Reinforcement Design Regulations”, and the second prize of national science and technology progress “Ultra -high and complex high -rise building structure key technology and application” Project team members.

Xue Yantao

Top Twelve

自从搞懂了这100+问题,我再也不怕图审专家了

Frequently Asked Questions of Large Steel Structure Design

Master the selection, support layout and earthquake anti -shock design of the large cross -steel structure

1. What factors are important consideration and optimization of the structure selection of large span steel structures?

Second, the problem of steel structure flat support layout, is it necessary to arrange, and how to arrange it?

Third, how to get the value of the vertical earthquake of the long cantilever structure?

“Specification of Earthquake Design”

“Technical Regulations for High -rise Architectural Concrete Structure”

Problems related to the design of space steel structure

July 7, 2022 19:30

Jinghui

researcher

China Aviation Planning and Design and Research Institute Co., Ltd., chief engineer of the Civil Architecture Institute, national first -level registered structural engineer, company craftsman, is good at growing span space structure and complex alien structure, and reinforcement of structural transformation.

Typical representative projects: Lanzhou Olympic Sports Center Comprehensive Museum, Shaoxing Science and Technology Museum, Mentougou Culture Center, Zhumadian Youth Palace Project, Panjin Olympic Sports Center, Guangxi Science and Technology Museum, Ulanchabu Science and Technology Museum, etc.

Special Thirteen

Frequently issues of prefabricated structure design

Master the building cover system and node design of the assembly structure

1. Cover system

1. The impact of common specifications on the overlap plate (thickness, reinforcement rate, protective layer)

2. Bullet of bruises and beams?

3. How to consider the overallness of the tightly combined board?

4. Is the vertical transmission force of the tightly fastening board and the cantalum?

5. The blending rate of the overlapping board

2. Analysis of beam nodes based on stress and installation

1. How to avoid the reinforcement in the node area?

2. How to consider the corner of the corner of the corner under the action of torque?

3. How much reinforcement to the lower part of the beam is appropriate?

Third, the design of the outer wall hanging panel node design

1. What kind of support can adapt to the deformation of the main structure?

2. How to construct a branch

1. “General Specifications for Earthquake Resistance of Construction and Municipal Engineering” GB55002-2021

2. “General Specification of Concrete Structure” GB55008-2021

Conflicted structure design related issues

June 10, 2022 19:30

Deng Shibin

Chief engineer

China Construction Southwest Design Research Institute Co., Ltd. Construction Industrialization Design Research Center Executive Chief Engineer; Deputy Director of Industrialization Specialization Committee of China Architectural Southwest Design and Research Institute; the first batch of green buildings and prefabricated buildings in Chengdu; Association experts; member of the Sichuan Civil Engineering Society of Construction Industrialization; Modernization of Chongqing Construction Industry; and the National Overfitting Building Industry Industry Expert of the Green Organization Building Industry Branch of the China Construction Energy Conservation Association.

Special Fourteen

Reinforcement reinforcement design internal review common issues

Master the common reinforcement engineering processing skills

1. How can the new Liang connect to the original column?

2. How to select the reinforcement method according to the range that needs to be improved?

3. How can the new column connect to the existing structure when adding layers?

4. Can the frame beam support reinforcement be restricted?

5. There are many cracks on the concrete floor, and some are seams. How to deal with it?

6. How to deal with stairs beams?

7. How to deal with concrete flooring openings?

The above questions are answered in conjunction with the case. The case in the case involves the terms of the “Against Architectural Appraisal and Reinforcement Specifications” and the parts where the original clauses are changed.

Interpretation of some provisions of the “Existing Architectural Appraisal and Reinforcement”.

Reinforcement design related issues

19:30, July 12, 2022,

19:30 on July 14, 2022

Mu Ying

First -level registered structural engineer, the chief engineer of the Beijing Branch of Shenzhen Construction Design and Research Institute Co., Ltd., an expert on bid evaluation of Beijing, a member of the Structural Professional Working Committee of the 6th Technical Committee of the Shenzhen Architectural Design and Research Council, a member of the China High -tech Industry The Huahua Research Association, an expert in scientific and technological achievements in the construction field, and a consultant and expert of the China Fang Green Construction Science and Technology Federation of Science and Technology, and the National Urban Update Industrial Technology Innovation Strategic Alliance.

02 Certificate of completion

After the training, the outstanding performance will be awarded the “Certificate of Complex” issued by the Education Innovation Center of Jianyan Technology Co., Ltd., a subsidiary of China Institute of Architecture Sciences Co., Ltd.

03 high -end training class classmate record

After the training, it will be obtained

“Structural Construction Figure Review High -end Training Class Student Records”

Establish a structural human circle

↓ ↓ ↓ ↓ ↓

04 Answers

“Structural construction map review high -end training classes answered question collection”

(Paper version)

General specifications involved:

03 Answer direction

03 Answer direction

03 Answer direction

03 Answer direction

03 Answer direction

03 Answer direction

04 live broadcast time

04 live broadcast time

04 live broadcast time

04 live broadcast time

04 live broadcast time

04 live broadcast time

01 training purpose

01 training purpose

01 training purpose

01 training purpose

01 training purpose

02 Subjective content

02 Subjective content

02 Subjective content

02 Subjective content

02 Subjective content

“Specification Specifications for Steel Structure”

Golden wave

“Structural Construction Figure Review of High -end Training Course” 2022 New Tongpan

“Structural Construction Figure Review of High -end Training Course” 2022 New Tongpan

“Structural Construction Figure Review of High -end Training Course” 2022 New Tongpan

Class 22-05, scheduled to open on May 18

Class 22-05, scheduled to open on May 18

Class 22-05, scheduled to open on May 18

Small class teaching, limited quota

Small class teaching, limited quota

Small class teaching, limited quota

Long press the QR code, overtime teacher WeChat

Long press the QR code, overtime teacher WeChat

Learn the course details and seize the final quota!

Learn the course details and seize the final quota!

Learn the course details and seize the final quota!

↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑

自从搞懂了这100+问题,我再也不怕图审专家了

↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑

↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑

Take your problem and solve it here!

Take your problem and solve it here!

Take your problem and solve it here!

The specifications involved:

The specifications involved:

The specifications involved:

Luo Xiaolin

Senior engineer

“Specification of Earthquake Earthquake Earthquake in Building and Municipal Engineering”

Jinghui

Deng Shibin

Mu Ying

After the training, it will be obtained

↓ ↓ ↓ ↓ ↓