From the once 28 bicycles to the motorcycle to the new energy vehicle today, people’s travel tools are constantly being upgraded. But no matter how changes, the tires need to be inflated every time after a while, and the tire gas is not enough to get on the road. The traditional pheasant is inconvenient to carry and use trouble, which is difficult to meet the needs of modern society.
In order to solve the problem of inflatable difficulties and slowness, NineBot No. 9 launched an electric speed inflatable treasure PJ32CQB, which is an inflatable treasure and charging treasure two -in -one product. It supports automatic tire pressure detection and intelligent presets. Stop, the entire process does not need to take care of it, making the inflatable incident very convenient.
In addition, the battery supports 18W fast charging input, which not only is fast -storage, but also can be charged for mobile phones as a 10000mAh charging treasure. It also has a lighting function, which is very practical. The following charging head network will disassemble this product in detail to see how the specific design work.
1. No. 9 electric speed inflatable treasure appearance
The product name, appearance map and selling point are printed on the front of the box.
There are product parameter information printed on the lower left corner of the back.
The product application scenarios are printed on the side, which can be inflated to scooters, bicycles, motorcycles, and car tires, and can also be inflated for balls.
The packaging contains inflatable treasures, inflatable pipe accessories, and instructions.
Accessories include three inflatable mouths including inflatable hose and gas needle.
The attached data cable is A to C line, and the cable is shorter than portable design.
NineBot No. 9 electric speed inflatable treasure consists of two parts: the fuselage and the battery, which uses a split design to connect through a reliable and stable insert buckle. The combination can be used as an electric inflatable treasure for tires. The battery is equivalent to the 10,000mAh charging treasure. Emergency charging for equipment such as mobile phones is used.
The “main shell of the charging treasure” is yellow, connected to the part of the shell is black, the overall surface matte treatment, the corner transition is round, and the style is very simple.
The connection module is equipped with an output jack and buckle slot. In addition, there is a NineBot brand logo on the shell.
There is a more obvious Ninebot brand logo on the side of the fuselage.
The top is equipped with a 1A1C output interface, power button and lighting light.
Driving at night can not only rely entirely on this product, but also light up, and the practicality is very good.
There is a non -slip glue pad at the bottom, and the product parameter information is printed on the shell
Product Name: No. 9 Electric Speed Flertation Treasure
Input: 9V2A, 5V2A
Battery capacity (capacity): 2500mAh (36.5WH)
Manufacturer: Na Embo (Changzhou) Technology Co., Ltd.
The height of the battery body was 97.01mm.
The width is 47.84mm.
The thickness is 56.06mm.
The weight is about 258g.
Use ChargerLab Power-Z KT002 to measure the USB-A port to support the SAMSUNG 5V2A and DCP protocols.
Charging the battery through the USB-C port, the input power is measured at 5.16V 2.05A 10.6W.
The inflatable body uses a gray -white shell, the surface is also frosted, and the corner transition is round.
There is a white shell
NineBot brand logo.
There are intonation holes on both sides.
The connection slot is set with a pin and buckle, which can be removed by pressing the gray bulging button on both sides.
Connect the close -up of the foot.
There are air holes, displays, and function keys on the top. The display screen protective board is scratched and has a warning.
Capted by stomach.
Connecting the inflatable hose tightening can be used, convenient and stable.
There are also air holes at the bottom, and a non -slip glue pad at the four ends.
The height of the body was 95.79mm.
The width is 96.09mm.
The thickness is 47.74mm.
The weight is about 278g.
The total weight of the fuselage battery is about 536g.
No. 9 Electric Speed Flequal Blood Disassembly
Disone the shell of the battery and welded the ultrasonic welding.
PCB board is fixed with screws and injection plastic protection.
Remove the main shell and remove the battery pack.
The two ends of the battery pack are fixed with black plastic shells. At the same time, there is a PCB small plate and wrapping tape to fix. The welding on the PCB is used to connect to the outlet of the full -time treasure.
In addition, it is posted with green pyrine insulation paper and foam for protection.
The four lithium batteries of the battery pack use the power god LR1865SK power cell with a capacity of 2600mAh and a rated voltage of 3.7V. It supports 2C discharge output.
The battery is connected to the four series, the protective board and the nickel of the battery pack are welded. The wires and thermist resistance are reinforced by the wire, and there are four lithium battery protection tubes in the middle.
On the other side, there is a lithium battery protection chip and current sample resistance, and three anti -paint protection is applied.
The lithium battery protection chip adopts Saiwei CW1353, supports 4-5 string battery protection, and supports battery charging balance function to eliminate voltage imbalance in the series battery pack.
The four -seal DC3903 protective tube, two strings.
Another small board is equipped with a lifting and booming circuit and a lower -voltage voltage circuit, with a lower -voltage chip, two inductors, and USB parent seats.
The back has a lifting controller and a single chip machine.
Nanxin SC8906 synchronizes the lifting booming controller for battery charging.
Close -up voltage voltage feature close -up, combined with Nanxin SC8906 to achieve battery charging.
Silk printing 6203A regulatory tube.
Silk -free single -chip microcomputer, for LED lights and lighting drivers.
The power key is written with four LED lights around.
Lighting is specially written.
A close -up of A port and C -port, welded with holes.
Nanxin SC8101 Synchronous antihypertensive converter chip, which is a power supply to USB port. The SC8101 supports 5V-32V wide range input voltage. By setting the voltage resistor, the output voltage is adjusted to adjust the voltage of 5.1 volt or customized.
The SC8101 also provides high -precision output current limit. When the output reaches the set current limit, the inverter enters the constant current (CC) mode; the total output power can be programmed by a resistor, which is convenient for constant power control. The built -in switch can provide 5V5A output.
Nanxin SC8101 integrates 45MΩ high -side NMOS and 30MΩ low -edge NMOS, achieving high efficiency. In addition, a low -end door driver (LSD) is provided to drive the external NMOS and works with the built -in NMOS; the programmable line loss compensation is used, the programm can be set, the external component is the least, which can achieve the maximum function of different applications for users; Using 3X3X0.55mmqfn packaging, ultra -thin and small can be placed inside the small space.
The charging head network learned that Nanxin SC8101 has previously been by Anke Powerhouse II 400 outdoor power, Nubia Mimimon Magnetic carrier -loading wireless charger, Anke magnetic suction dual wireless charger, Huawei P40 mobile phone protective case, Xiaomi Mi The two -in -one charger and other products are adopted. In addition, Nanxin’s fast charge chip is widely used in mobile power, charger, car charging and other fields, and has been adopted by dozens of products.
Anti -voltage inductor close -up.
Disassemble the inflatable fuselage shell.
There is a black soft glue pad on the shell for buffering to protect the internal device of the fuselage.
The internal permanent magnet motor occupies about half of the space, and the right end of the motor has a fan
Heating, plastic shell protection in the upper left corner.
Enter the pin to connect directly
Power supply on the motor, and the other two sets of wire connection function control small boards.
Functional small boards are fixed on the top shell with screws, with single -chip machines and connecting slots on the board.
Remove the small board, with a display screen and four keys on the other side.
Silk -free single -chip microcontroller, used for inflatable body function control.
Silk printing 7544-1 regulatory tube.
Four function keys are specially written.
The display screen is written to display inflatable air pressure and inflatable mode.
Connect to control the slot close -up of the small board.
Permanent magnet motor
There is a small fan at the tail.
You can see a small board for dismantling the fan.
A new power NCE30H12K switch tube is welded on the small board to control the operation of the motor. NMOS, 30V resistance, 3.5MΩ, is encapsulated with To-252-2L.
Electric information close -up, 12V motor.
There is a white plastic shell at the rotating gear
The dynamic gear is written, and a white connecting rod is connected to the air pump on the metal shell on the deceleration gear. The inside of the gear is a rolling bearing, and the resistance is smaller.
The exhaust end screw fixes a tire compressive plate, and the wire injection is protected.
On the other side of the small board, there is a pressure sensing device.
After all the disassembly was dismantled, come to Zhang Quanjia portrait.
Summary of charging head network disassembly
NineBot No. 9 electric speed inflatable treasure consists of two parts: fuselage and battery, and the battery can be equated to the 10000mAh charging treasure, equipped with a 1A1C interface, and also has lighting lights. Usually, camping can charging battery life for user mobile phones, and when encountering emergencies such as changing tires at night, light sources can also be provided. In addition, as an electric tool, it supports 18W PD fast charging, which can be resurrected quickly with blood, which is also a highlight.
The design of the inflatable fuselage is very intelligent, equipped with tire pressure display and function keys to deal with preset memory functions in different scenarios, which can save common tire pressure. The inflatable becomes very convenient for users to take care of it and save effort and effort. In addition, with three professional inflatable mouths, up to a car, down to basketball, etc., can be inflated and widely used.
The charging head network was disassembled and found that the battery internal battery pack was composed of four power god LR1865SK power cells. It was equipped with a thermistor for temperature monitoring. In addition, there are two regulatory circuits. Nanxin SC8906 is responsible for charging battery packs. The SC8101 lowered voltage is USB output. In addition, the single -chip machine is used to drive the LED light and lighting light, and the function of the fuselage is also controlled by a single -chip microcomputer.
Capted by stomach.