German INA slider KWE35H-G3-V1 provides technology, installation parameters

Two rows of high -narrow sliders used in linear cylinder bearing and guide rail components

Ina of INA guide slide:

1. Simple lubrication structure

The straight -line guide rail is equipped with oil injection cups on the slider, which can be directly injected with oil injection in oil injection. It can also be connected to the oil supply pipe to automatically lubricate the oil supply machine, so that the wear consumption is less, so that the machine can maintain the essence of the main work for a long time.

2. Strong dustproof and sealing ability

The dustproof and dustproof performance of the linear guide rail is good. The two ends of the slider are equipped with a sealed end cover. The bottom can be used at the bottom. At the same time, the slider fixed screw hole is equipped with a dust -proof screw hole cover to prevent the accumulation of dust.

Life and performance of products.

3. Easy installation and easy swap

Due to the use of precision processing technology, the sliding rail has a high linear line, the installation screw hole error error in the slide rail is convenient, and the installation is convenient. The linear guide rail is interchangeable. Taiwan reaches high precision.

4 ‘Loading ability is strong and strong

The straight -line guide rail adopts the Gothic four -point contact design. The reasonable ratio of the arc groove is not only small in contact with the stress, but also greatly improved when the load capacity and stiffness are relative to the V -type plane ball point. Because the copper ball is symmetrically four -point, the load of the surrounding directions can be loaded at the same time, and there is almost no offset. Therefore, the rigidity can maintain high accuracy.

Ordering an example, ordering number

Slider, symmetrical

Direction of bolt holes

Slid

Order number 2kWe35-H-G3-V1, Figure 10

guide

Order number 1TKD35-G3/1480-20/20, Figure 10

Two lines of straight circulating rolling bearing bearing

Two slider KWE of the guide rail component

Size 35

Slide type H

德国INA滑块 KWE35H-G3-V1提供技术,安装参数

Accuracy level G3

Pre -load V1

A guide rail TKD

The guide rail length is 1480 mm

AL

AR

20 mm

Position

Figure 10

KWE35-H-G3-V1 2

1480

20

TKD35-G3/1480-20/20 1

Ina slider KWE35H-G3-V1 Features:

High work accuracy: The movement of the straight -line guide rail is achieved by rolling, not only the friction coefficient drops to 1/50 of the sliding rail, but the gap between the resistance and static friction resistance also becomes very small, achieve stable exercise, reduce impact and vibration, and it is not easy to cause crawling phenomena Therefore, it can reach UM -level feed and positioning accuracy, which is beneficial to improve the response speed and sensitivity of the CNC coefficient. Significantly reduced the driving rate: Because the friction force is very small during the linear guide rail movement, as long as the small power is needed, the machine can move, which is obviously large. At high speeds, frequently start and change movement parts. The lubrication structure is simple: the straight -line guide rail is equipped with oil injection cups on the slider, which can be directly injected with oil injection of oil, or the oil supply pipe can be connected to automatically lubricate the oil supply machine, so that the wear consumption is less, so that the machine can keep the machine for a long time to maintain it for a long time. The master work.

You need to know more about imported bearing information. Welcome to leave a message in the comment area. For those aspects of the bearing/slider, please contact us Dongguan Lingjun Machinery.

Ordering an example, ordering number

Size 35

Accuracy level G3

20 mm

20

Product Recommendation: soft closing ball bearing slide